Zom-Lens Zoom Position Adjustment - Christie 4K35-RGB Technical Reference

Command Description
WRP+KGAN <value> Enables or disables gain compensation when
2D keystone is applied.
WRP+SLCT?L Retrieves a list of available warp maps.
(Read-only)
WRP+SLCT <value> Changes the warp map to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Examples
Disable warping:
(WRP+SLCT 0)
Select the third warp map:
(WRP+SLCT 3)
Retrieve a list of available warp maps:
(WRP+SLCT?L)
ZOM–Lens Zoom Position Adjustment
Sets the lens zoom.
This command requires a zoom motor on the lens for it to work and is only available when the
projector is on.
Commands
Command Description
ZOM?m Returns the current minimum and maximum
values for the zoom position based on the
last lens calibration performed. The returned
range is persistent across AC cycles. (Read-
only)
ZOM <position> Adjusts the lens zoom to the specified
position. The position is persistent across AC
cycles. (Save value)
Examples
Get the current minimum and maximum values for the zoom axis:
(ZOM?m)
Result:
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
0 = Disables gain compensation (Default)
1 = Enables gain compensation
—
0 = Turns off warping
1 to 4 = Selects one of four warp maps, if
available
11 = 2D keystone
Values
—
position = Numeric value subject to the
range returned in ZOM?m
64