Sns-Source Name Setting; Sor-Rear Projection - Christie GS Series Technical Reference

SNS–Source Name Setting
Changes the source name to a user-defined name.
Subcode availability is determined by your hardware configuration.
Commands
Command
SNS+SRC<value> "name"
SOR–Rear Projection
Selects the orientation of the displayed image.
Reverse the image so it can be projected from behind a translucent screen.
Commands
Command Description
SOR <0 | 1> Enables or disables rear projection.
Examples
Turn off rear projection:
(SOR 0)
Turn on rear projection:
(SOR 1)
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Description
Applies a name to the specified input.
Serial API commands
Values
0 = VGA1
1 = VGA2
2 = BNC
3 = HDMI1
4 = HDMI2
5 = Component
6 = S-Video
7 = Video
Values
0 = Turns off rear projection (Default)
1 = Turns on rear projection
54