Edg-Edge Enhancement; Err-Error Log - Christie 599 GS Series Technical Reference

Set the top blend width to 200 pixels:
(EBL+TOPW 200)
Set the blend area brightness offset to 1000:
(EBL+BLOF 1000)
Set the non-blend area brightness offset to 1000:
(EBL+NBOF 1000)
EDG–Edge Enhancement
Applies edge enhancement to an image.
Commands
Command Description
EDG <value> Sets the edge enhancement for an image.
Examples
Set the edge enhancement to the maximum value:
(EDG 2)
ERR–Error Log
Displays or clears the error log.
Commands
Command Description
ERR? Shows the error log. (Read-only)
ERR+CLER1 Clears the error log. (Write-only)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 = Off (Default)
1 = Normal
2 = Maximum
Values
—
—
26