Adjusting Vertical Pincushion; Adjusting 4-Corner; Enabling Auto Warp Filter - Christie HS 2K Series User Manual

Adjusting vertical pincushion

Use vertical pincushion to correct a pinched image shape in which the vertical straight lines are
curved inwards or vertical straight lines are curved outwards from the center.
1. Select Menu > Size & Position > Geometry Correction > Pincushion > Vert Pincushion.
2. To adjust the vertical pincushion, adjust the slider by arrow keys or select ENTER to input the
value you selected.
3. After inputting the value, select ENTER to apply.

Adjusting 4-corner

Use 4-corner to correct the four corners of the projector's display image.
1. Select Menu > Size & Position > Geometry Correction > 4-Corner.
2. Select the corner and the direction to adjust.
3. To move the corner, adjust the slider by arrow keys or select ENTER to input the value.
4. After inputting the value, select ENTER to apply.
5. To adjust the other corner or direction, repeat step 2 to 4.

Enabling auto warp filter

Improve the sharpness of the image and reduce the ghosting automatically after geometry
correction, such as keystone, pincushion, 4-corner, and warping.
1. Select Menu > Size & Position > Geometry Correction > Auto Warp Filter.
2. To enable the setting, select ENTER.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
A
A A
B
B
A A
Adjusting the size and position
B
B
B
34