Accessories - CNC-Step T-Rex Servo Series Operating Instructions Manual

Accessories

12
There are a wide variety of possible applications for the machine and thus also numerous
accessories.
Here is an excerpt from our extensive accessory catalogue:
Maschinenerweiterungen
- Z-axis with 300mm or 400mm travel and higher passage height
- Protective fences (complete, U-shape, L-shape or only 1 wall)
-
T-slot plates, for partial areas or for the complete work area
-
Suction systems and suction shoes
-
Minimum quantity lubrication
-
Vacuum pump
Spanntechnik
-
Clamping elements, groove stones, vices
Tools Milling, engraving, drilling
-
ATC HF spindles for automatic tool change
-
Milling cutters for various applications and materials, engraving stitches, drills
Tools for various applications
-
Tangential cutting modules (oscillating or fixed), creasing modules
-
Rotation axes, tailstocks and jaw lining
-
3D-Finder (Kantentaster)
Hardware and Software
- USB radio remote control, electronic handwheel (LAN)
- CAD/CAM Software, Schriftenpakete, Spezialsoftware
If you are interested, please contact our customer service by e-mail or telephone.
We will be happy to advise you and send you a corresponding offer.
Numerous suggestions and information can also be found on our website.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating instructions
T-Rex Servo-Series
Page 89
23.09.2020