Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CNC-Step T-Rex Series
Summary of Contents for CNC-Step T-Rex Series
- Page 1 Quick Start Guide T-Rex Series www.cnc-router-store.com Status: 16.09.2015...
- Page 2 This Quick Start Guide will help you with the initial start-up of the machine. It also includes optional accessory that is connected directly to the machine or control. For more detailed information please refer to the individual manuals. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 2 Support: +49 (0)2831/91021-50...
-
Page 3: Table Of Contents
......................22 6.1.9 Load and save machine parameters ................... 23 ConstruCam 3D ........................24 6.2.1 Installation ......................... 24 6.2.2 Interaction with WinPCNC ....................24 CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 3 Support: +49 (0)2831/91021-50 15.01.2015... - Page 4 Quick Start Guide T-Rex Series Other Software ........................25 CUSTOMER SERVICE ....................26 CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 4 Support: +49 (0)2831/91021-50 15.01.2015...
-
Page 5: Connectors And Cables On The Machine
Motor connection cable Z-axis Neutrik 4pol. Z HF-Spindle (to Connection Panel Z-axis) Hirschmann 7pol. 230V Socket Connection Panel Z-axis 230V Plug Connection Panel Machine CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 5 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 6: Mini Xlr Jack
4th axis are found via the PIN15 of the LPT port. For this combination, we have a solution. To do so, please contact our customer service. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 6 Support: +49 (0)2831/91021-50... -
Page 7: Connection Panel Z-Axis
This socket can be connected to an external power supply, or alternative directly to the machine control Zero-3. Then there is the possibility to turn off the power by software. (see chapter 2.2) CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 7 Support: +49 (0)2831/91021-50... -
Page 8: Noga Minimum Lubrication System
1 – 230V power supply (at Rel.2 of Zero-3) 2 – Air output to Z axis 3 - silencer 4 – Air connection (min. 2.5 bar) CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 8 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 9: Connections To The Zero-3 Stepper Motor Controller
Connector D-Sub 9pol. for motor Z Connector D-Sub 15pol. for 4th axis (Rotary axis / tangential knife) Connector D-Sub 9pol. for Control line ST Emergency-stop-button Power-button Status-LEDs CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 9 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 10: Back Side
This guarantees also that the power supply is interrupted at faults and in emergency case. The maximum power consumption per outlet may not exceed 8A. The current consumption of the two sockets together may not exceed 13.5A. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 10 Support: +49 (0)2831/91021-50... -
Page 11: Connecting The Machine To The Zero-3 Control
- Make sure that the control is turned off. - Connect all 5 cables with the Zero-3 controller. - Make sure that you back up all connections with the knurled screws from loosening. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 11 Support: +49 (0)2831/91021-50... -
Page 12: Connection Possibility Of A 4Th Axis
- Connect the supplied power cable to the C-socket of the controller. - Make sure that you back up all connections with the knurled screws from loosening. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 12 Support: +49 (0)2831/91021-50... -
Page 13: Connection Options Of Optional Accessories
Overview Connection and power supply via Zero -3 control Milling motors Compressor Noga spray cooling Zero-3 Back Side Granitograv Laser engraving unit Converter / HF-spindle CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 13 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 14: Milling Motors
This is recommended by us. This has the advantage that lubrication is only done when it is necessary. Make sure that the control is turned off. Connect the power adapter to the socket 2 (Rel.2) Zero-3 controller. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 14 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 15: Inverter And Hf Spindles
Connect the power supply of the respective control box with the socket 1 (Rel.1) of the Zero-3 controller. Please note for operation the associated manuals with more detailed information! CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 15 Support: +49 (0)2831/91021-50... -
Page 16: Software Installation
32-bit 32-bit 32- / 64-bit 32- / 64-bit 32- / 64-bit 32- / 64-bit System WinPCNC Light Economy Profi Profi E/A Profi LPT2 Variant CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 16 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 17: Installation
In all variants, the LPT2 port is only used for optional accessories, and some machines extensions. The additional hardware (ncUSB, USB dongle) is now recognized and installed by Windows. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 17 Support: +49 (0)2831/91021-50... -
Page 18: Configuration
Some computers have multiple LPT ports, so that the right one first has to be found out. If the interfaces are not marked on the PC, you need to find out which interface you have connected to the control. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 18 Support: +49 (0)2831/91021-50... - Page 19 When using 2 LPT ports (only Economy) please repeat with both connected interfaces ! This port address (es) you must now enter in WinPCNC (see 6.1.6). CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 19 Support: +49 (0)2831/91021-50...
-
Page 20: Determination Of The Com Interface (Professional)
In WinPCNC you must then select COM4 (see 6.1.6). The COM4 interface is provided via the USB / Serial converter. This is indicated by the entry USB Serial Port (COM4). CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 20 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 21: Entry Of The Determined Interface / Port Address In Winpcnc
The LPT1 port address you have already registered. (s. above) The LPT2 port address, you must enter, under Parameters - machine- signal Assistant . Caution: After each parameter setting in WinPCNC Always press the "Save" button. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 21 Support: +49 (0)2831/91021-50 15.01.2015... -
Page 22: Check The Efficiency
Please read the handbook by WinPCNC. The examples described herein refer to our recommended software WinPCNC. With alternative software such as Mach3 etc. the situation is similar. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 22 Support: +49 (0)2831/91021-50... -
Page 23: Load And Save Machine Parameters
Do you want to make changes to the settings in WinPCNC? Then save the "current" settings under a different name and then make your changes. This ensures that you do not overwrite any existing settings (they are perhaps still needed !?) CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 23 Support: +49 (0)2831/91021-50... -
Page 24: Construcam 3D
Confirm once the WINPCNC.EXE and then the WinPCNC.TMP. For details please refer to the help files in ConstruCAM 3D. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 24 Support: +49 (0)2831/91021-50 15.01.2015... - Page 25 Filou NC12 for plasma cutting (smooth start of contours) Filou DeskProto MultiAxis 6.1 for rotation axes For further information please refer to the respective documentation. CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 25 Support: +49 (0)2831/91021-50 15.01.2015...
- Page 26 If you have questions, please contact our customer service via e-mail or phone. We advise you gladly. Numerous suggestions and information can be found on our website: www.cnc-router-store.com CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 26 Support: +49 (0)2831/91021-50 15.01.2015...
Need help?
Do you have a question about the T-Rex Series and is the answer not in the manual?
Questions and answers