CNC-Step T-Rex Servo Series Operating Instructions Manual page 78

Improperly performed troubleshooting work
WARNING:
Risk of injury due to improper troubleshooting!
Improperly performed troubleshooting work can lead to serious injuries and
significant property damage.
• Ensure sufficient freedom of installation before work begins
• Pay attention to order and cleanliness at the assembly site!
Components and tools lying loosely on top of each other or around
are sources of accidents.
• When components have been removed, pay attention to proper
assembly, reinstall all fasteners and maintain screw tightening
torques.
• Before recommissioning, please note the following:
➢ Ensure that all troubleshooting work has been carried out and
➢ Ensure that there are no people in the danger zone.
➢ Ensure that all covers and safety devices are installed and
Behavior in the event of disturbances
1 In the event of disturbances that pose an immediate danger to persons or property,
initiate emergency stop immediately.
2 Determine the cause of the fault.
3 If troubleshooting requires work in the hazardous area, switch off the machine and
secure it against reactivation.
Inform those responsible at the place of use immediately about a malfunction.
4 Depending on the type of fault, have it eliminated by authorized personnel.
The following fault table provides information on who is entitled to rectify the
fault.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
completed in accordance with the information and instructions in
these instructions.
functioning properly.
Operating instructions
T-Rex Servo-Series
Page 78
23.09.2020