General Hazards In The Workplace - CNC-Step T-Rex Servo Series Operating Instructions Manual

2 .2 .7 G e n e r a l h a z a r d s i n t h e wo r k p l a c e
Noise
WARNING:
Risk of injury due to noise!
The noise level occurring in the work area can cause severe hearing
damage.
• Always wear hearing protection when working.
• Only stop in the danger zone if necessary.
Dirt and objects lying around
CAUTION:
Risk of injury due to falling over dirt and objects lying around!
Dirt and objects lying around form sources of slipping and tripping. In the
event of a fall, injuries can be caused.
• Always keep work area clean.
• Remove objects that are no longer needed from the work area and
• Mark unavoidable tripping points with yellow-black marking tape.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
especially from the ground.
Operating instructions
T-Rex Servo-Series
Page 16
23.09.2020