Instruction; Personal Protective Equipment - CNC-Step T-Rex Servo Series Operating Instructions Manual

2 . 4 . 2 I ns t r u c t i on
The operator must regularly instruct the staff. For better follow-up, a training protocol must
be created with the following minimum content:
• Date of instruction
• Name of the instructor
• Contents of the instruction
• Name of the instructor
• Signatures of the instructed and the instructor
2 .5 P e r s o n a l p r o t e c t i v e e q u i p me n t
Personal protective equipment is used to protect people from adverse effects on safety
and health at work.
Personnel must wear personal protective equipment during the various tasks on and with
the machinery, which will be referred to separately in the various sections of this manual.
Description of personal
protective equipment
Protective Clothing
Protective clothing is tight-fitting workwear with low tear resistance, with
tight sleeves and without protruding parts.
Chemical-resistant protective gloves
Chemical-resistant protective gloves are used to protect hands from
harsh chemicals.
Hearing protectors
Hearing protection is used to protect against hearing damage caused by
noise exposure.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
The personal protective equipment is explained below:
Operating instructions
T-Rex Servo-Series
Page 19
23.09.2020