Signage; Mandatory Symbols; Prohibition Signs - CNC-Step T-Rex Servo Series Operating Instructions Manual

2 .9 S i g n a g e
The following icons and signs are located in the workspace. They refer to the immediate
environment in which they are installed.
WARNING:
Danger with illegible signage!
Over time, stickers and signs can become dirty or otherwise
unrecognizable, so that dangers cannot be detected, and necessary
operating instructions cannot be followed. As a result, there is a risk of
injury.
• Keep all safety, warning, and operating instructions in an easy-
• Replace damaged signs or stickers immediately.
2 .9 .1 Ma n d a t o r y S y mb o l s
Follow the instructions
Use the marked machine only after reading the instructions.
2 .9 .2 P ro h i b i t i o n s i g n s
Bans for people with pacemakers
In the area of this shield, strong electromagnetic or magnetic fields are to be
expected, which can disturb pacemakers or render them inoperable.
Persons wearing a pacemaker are not allowed to approach a machine marked
with this safety mark.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
to-read condition at all times.
Operating instructions
T-Rex Servo-Series
Page 25
23.09.2020