Maintenance Work; Machine Cleaning - CNC-Step T-Rex Servo Series Operating Instructions Manual

8 .4 Ma i n t e n a n c e wo r k
8 .4 .1 Ma c h i n e c l e a n i n g
Regular maintenance of the machine prevents the bonding of moving components.
HINT!
Property damage caused by compressed air!
Compressed air can damage the ball screw and rack and pinion drives of the
T-Rex series machine.
Never use compressed air to clean the T-Rex series machine.
Personal:
Protective
equipment:
1
Set the power switch to the terminal in position "0" or "Off". Disconnect compressed
air.
2 Free the machine from chips with the help of brushes or brooms.
CAUTION:
Risk of injury due to chips!
Chips can be sharp-edged and cause deep cuts.
Always wear protective gloves when removing chips.
3 Free recirculating ball screws and linear guides from chips.
4 Clean the entire machine with a slightly oil-soaked cleaning cloth DIN 61650
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
• Operator
• Protective clothing
• Safety shoes
• Gloves
Operating instructions
T-Rex Servo-Series
Page 74
23.09.2020