Safety Devices That The Operator Must Retrofit; Behaviour In The Event Of A Fire Outbreak And Accident - CNC-Step T-Rex Servo Series Operating Instructions Manual

2 .6 .2 S a f e t y d e v i c e s t h a t t h e o p e r a t o r m u s t re t ro f i t
Suction
For the processing of light metal alloys such as magnesium, aluminium, titanium and wood-based
materials, a suction device must be installed if it has not already been factory-installed.
NOTE: Danger to people and the environment!
In case of incorrect handling, for example without suction, there is a risk
of particulate matter development. This can at high concentrations
lead to a fire.
Since fine dust acts inhaled, it mainly damages the respiratory tract.
The following effects of high concentrations of particulate matter in the air can
generally be observed:
•
Temporary impairment of the respiratory tract
•
Increased need for medication in asthmatics
•
Increased hospital admissions
•
Increase in mortality due to respiratory diseases
and cardiovascular problems
2 .7 B e h a v i o u r i n t h e e v e n t o f a f i r e o u t b r e a k a n d a c c i d e n t
Preventive measures
• Always be prepared for fire and accidents!
• Keep first aid kits (first aid kits, blankets, etc.) and fire extinguishing equipment
functional and at hand.
• Familiarize personnel with accident reporting, first aid and rescue facilities.
• Keep access roads clear for emergency vehicles.
Measures to be taken in the event of a fire outbreak and accidents
• Immediately trigger emergency stop by emergency stop device.
• If there is no danger to one's own health, rescue people from the danger zone.
• If necessary, initiate first aid measures.
• Alert the fire and/or rescue service.
• In the event of a fire outbreak: If there is no danger to your own health, fight fires
with fire extinguishing devices and continue firefighting until the arrival of the fire
brigade.
• Inform those responsible at the place of use.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating instructions
T-Rex Servo-Series
Page 23
23.09.2020