Environmental Protection - CNC-Step T-Rex Servo Series Operating Instructions Manual

• Clear access roads for emergency vehicles.
• Instruct emergency vehicles.
2 .8 E n v i r o n me n t a l p r o t e c t i o n
NOTE: Danger to the environment due to incorrect handling of
environmentally hazardous substances!
Incorrect handling of environmentally hazardous substances, especially
incorrect disposal, can cause considerable damage to the environment.
Lubricants such as greases and oils contain toxic substances. They must
Lubricants
not be allowed to enter the environment. Disposal must be carried out by a
specialist waste management company.
Gear oil contains toxic substances. They must not be allowed to enter the
Gear oil
environment. Disposal must be carried out by a specialist waste
management company.
Kühlemulsion Cooling emulsion can contain toxic and environmentally hazardous
substances. They must not be allowed to enter the environment. Disposal
must be carried out by a specialist waste management company. Observe
the manufacturer's safety data sheet.
It is recommended to use a Umwelt-friendly cooling lubricant.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
• Always observe the instructions below on the handling of
environmentally hazardous substances and their disposal.
• If environmentally hazardous substances accidentally enter the
environment, take appropriate measures immediately. In case of
doubt, inform the competent local authority about the damage
and inquire about appropriate measures to be taken.
Operating instructions
T-Rex Servo-Series
Page 24
23.09.2020