Storage - CNC-Step T-Rex Servo Series Operating Instructions Manual

Transport
Fig. 25: Transport by forklift
1 0 .6 S t o r a g e
Storage of packages
Store packages under the following conditions:
• Do not store outdoors.
• Store in a dry and dust-free place.
• Do not expose to aggressive media.
• Protect from sunlight.
• Avoid mechanical vibrations.
• Storage temperature: 10 to 35 °C.
• Relative humidity: max. 60 %.
• When stored for more than 3 months, regularly check the general condition of all
parts and packaging. If necessary, refresh or renew the preservation.
HINT:
Under certain circumstances, there may be storage instructions on the
packages that go beyond the requirements mentioned here. Comply with
these accordingly.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
1 Move the forklift with the forks between or under the
bars of the pallet.
2 Retract the forks so far that they protrude on the
opposite side.
3 Ensure that the pallet cannot tilt when the center of
gravity is out of center of gravity.
4 Lift the pallet with transport piece and start the
transport.
Operating instructions
T-Rex Servo-Series
Page 86
23.09.2020