Lubricate Machine - CNC-Step T-Rex Servo Series Operating Instructions Manual

8 .4 .2 L u b r i c a t e ma c h i n e
The lubricants reduce wear, protect against contamination, reduce corrosion, and extend the service
life due to their properties.
For consumables, see Chapter 3. 5.
Personal:
Protective
equipment:
The machine has automatic central lubrication. See Chapter 4.3.7
The lines and distributors of the central heating system must be checked daily for leaks and
replaced if necessary.
In addition to central lubrication, all metallic components of the machine should be cleaned
regularly and wetted with a resin- and acid-free oil or grease.
CAUTION:
Risk of damage to health due to contact with oil and grease!
Contact with oil and fat can lead to damage to health.
• Avoid skin contact.
• Remove oil and fat from the skin immediately.
• Do not inhale vapors.
CAUTION:
Risk of damage to health due to contact with oil and grease!
Contact with oil and fat can lead to damage to health.
• Avoid skin contact.
• Remove oil and fat from the skin immediately.
• Do not inhale vapors.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
• Professionals
• Protective clothing
• Safety shoes
• Chemical-resistant protective gloves
Operating instructions
T-Rex Servo-Series
Page 75
23.09.2020