Spares - CNC-Step T-Rex Servo Series Operating Instructions Manual

8 .2 S p a r e s
WARNING:
Risk of injury due to the use of incorrect spare parts!
The use of incorrect or faulty spare parts can create risks for personnel and
cause damage, malfunctions or total failure.
• Use only original spare parts from the manufacturer or spare parts
approved by the manufacturer.
• If you have any doubts, always contact the manufacturer.
Loss of warranty
If non-approved spare parts are used, the manufacturer's warranty expires.
Purchase spare parts from authorized dealers or directly from the manufacturer.
The spare parts list is available on request.
Indicate the following points when ordering spare parts:
➢ Type
➢ Year of construction
➢ Serial No.
➢ Execution
➢ Quantity
➢ Designation
➢ Desired shipping method (post, freight, sea, air, express)
➢ Address for dispatch
Spare parts orders without the above information cannot be taken into account. In the absence of
information about the shipping method, shipping will be at the discretion of the supplier.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating instructions
T-Rex Servo-Series
Page 72
23.09.2020