Activities After Use; Shutdown Emergency - CNC-Step T-Rex Servo Series Operating Instructions Manual

7 .6 A c t i v i t i e s a f t e r u s e
Personal:
Protective
equipment:
1. Turn off the machine.
CAUTION:
Risk of injury due to chips!
Chips can be sharp-edged and cause deep cuts.
Always wear protective gloves when removing chips.
2. Cleaning the machine (see Maintenance).
7 .7 S h u t d o wn E me r g e n c y
In dangerous situations, the movements of components must be stopped as quickly as possible and
the power supply switched off.
Shutdown in an emergency
1 Immediately trigger emergency stop by emergency stop device.
2 If there is no danger to one's own health, rescue people from the danger zone.
3 If necessary, initiate first aid measures.
4 Alert the fire and/or rescue service.
5 Inform those responsible at the place of use.
6 Switch off the machine and secure it against reactivation.
7 Clear access roads for emergency vehicles.
8 Instruct emergency vehicles.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
• Operator
• Protective clothing
• Safety shoes
• Gloves
Operating instructions
T-Rex Servo-Series
Page 69
23.09.2020