Warnings - CNC-Step T-Rex Servo Series Operating Instructions Manual

Caution for people with metal implants
In the case of strong magnetic and electromagnetic fields, it must be expected
that all implants made of metal can heat up and thus harm humans. Wearers of
metallic implants must avoid the area marked with the safety mark.
Operation with necklace prohibited
There is a risk from retraction or entanglement on moving parts.
Remove necklaces before entering the marked area.
Operation with tie prohibited
There is a risk from retraction or entanglement on moving parts.
Remove the tie before entering the marked area.
Operation with long hair prohibited
There is a risk from retraction or entanglement on moving parts. People with
long hair must use a hairnet or hood.
2 .9 .3 Wa r n i n g s
Voltage
Only electricians are allowed to work in the work area marked in this way.
Unauthorized persons may not enter the marked workstations or open the marked
cabinet.
Automatic start-up
The start-up of machines in production plants is indicated by a flashing light or
an acoustic signal. From this moment on, all work must be completed.
Leave the danger zone after signaling.
Keep enough distance to all parts that can move, there is a risk of crushing or
moving in.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating instructions
T-Rex Servo-Series
Page 26
23.09.2020