CNC-Step T-Rex Servo Series Operating Instructions Manual page 71

Improperly performed maintenance work
WARNING:
Risk of injury due to improperly carried out maintenance work!
Improper maintenance can lead to serious injury and significant property
damage.
• Ensure sufficient freedom of installation before the start of the work.
• Pay attention to order and cleanliness at the assembly site!
• When components have been removed, pay attention to proper
• Before recommissioning, please note the following:
➢ Ensure that all maintenance has been carried out and completed
➢ Ensure that there are no people in the danger zone.
• Ensure that all covers, and safety devices are installed and
Environmental protection
Observe the following information on environmental protection during maintenance work:
• At all lubrication points that are supplied with lubricant by hand, remove the
leaking, used or excess grease and dispose of it in accordance with the
applicable local regulations.
• Collect replaced oils in suitable containers and dispose of them in accordance
with the applicable local regulations.
• Collect oil/grease-containing rags in suitable containers and dispose of them in
accordance with the applicable local regulations.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Components and tools lying loosely on top of each other or around
are sources of accidents.
assembly, reinstall all fasteners and maintain screw tightening
torques.
in accordance with the instructions and instructions in this guide.
functioning properly.
Operating instructions
T-Rex Servo-Series
Page 71
23.09.2020