Störungstabelle - CNC-Step T-Rex Servo Series Operating Instructions Manual

9 .2 S t ö r u n g s t a b e l l e
Description
Softwarefehlermeldungen:
Emergency Stop
HF Spindle
Oil Stand
Safety doors
Servomotor
Malfunctions and problems with the machine:
Step loss
Servomotor no
longer moves
Insufficient
lubrication
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Cause
Emergency Stop
button pressed
Error message
converter / HF spindle
No oil available
Doors from the safety
fence are open
Servo power amplifier
indicates interference
Travel speed too high
Timing belt torn
Servo power amplifier
on interference
Check hoses of the
central lubrication,
leakage?
Operating instructions
T-Rex Servo-Series
Remedy
Check and unlock the
emergency stop
button
Check HF spindle /
inverter
Check and fill storage
tank central
lubrication
Close doors
Operate the reset
button on the servo
power amplifier
See Chapter 4.4.1
Check the setting in
the software
Replace the timing
belt on the servo
motor
Operate the reset
button on the servo
power amplifier
See Chapter 4.4.1
Checking the hoses
and distributors of the
central lubrication for
leakage
Personal
Operator
Professionals
Operator
Operator
Professionals
Operator
Professionals
Professionals
Professionals
Page 79
23.09.2020