Schedule Of Maintenance - CNC-Step T-Rex Servo Series Operating Instructions Manual

8 .3 S c h e d u l e o f Ma i n t e n a n c e
The following sections describe the maintenance work required for optimal and trouble-
free operation of the machine.
If increased wear and tear can be detected during regular checks, to shorten the required
maintenance intervals according to the actual signs of wear. If you have any questions about
maintenance work and intervals, contact the manufacturer.
The maintenance of the supplier components can be found in the separate
operating instructions.
Modell T-Rex
Interval
Daily
10 operating hours
Monthly
After use
When required
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Maintenance
Check machine for damage and wear
Verify security components
Emergency stop, door contacts safety
fence
Verification of the function of the
automatic central lubrication
Check the oil level of central lubrication
Loosen bellows and push them aside to
clean the guide and drive trains
Machine cleaning
If the maintenance unit for the
Supply of compressed Air
Empty the oil and water separator
Clean metallic machine parts and rub
them with a resin- and acid-free
oil/grease
Cleaning the air filter of the vacuum
pump
Operating instructions
T-Rex Servo-Series
To be executed by
Professionals
Professionals
Professionals
Operator
Professionals
Operator
Operator
Operator
Operator
Page 73
23.09.2020