Change Tool; Switch Off - CNC-Step T-Rex Servo Series Operating Instructions Manual

7 .4 .2 C h a n g e t o o l
Personal:
Protective
equipment:
1 In the case of milling motors, ensure that the tool spindle is voltage-free (power switch
or power plug).
CAUTION:
Risk of burns due to hot surfaces! Risk of cutting due to tools and
chips!
Contact with hot components can cause burns. Tools and chips can cause
injuries when touched.
Wear protective gloves when changing tools.
2 Change tool, see separate operating instructions for tool holder.
3 Make sure that the tool spindle is again provided with voltage (power switch or power
plug).
7 .5 S wi t c h o f f
1. Shut down your computer (Windows 10).
2. Decouple compressed air connection
3. Turn off the main switch.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
• Operator
• Protective clothing
• Safety shoes
• Gloves
Operating instructions
T-Rex Servo-Series
Page 68
23.09.2020