Operation; Safety Instructions For Operation; Activities Before Use - CNC-Step T-Rex Servo Series Operating Instructions Manual

Opera tio n
7
7 .1 S a f e t y i n s t r u c t i o n s f o r o p e r a t i o n
Improper operation
WARNING:
Risk of injury due to improper operation!
Improper operation can lead to serious injuries and significant property
damage.
• Perform all operating steps in accordance with the instructions and
instructions in these instructions.
• Before starting the work, note the following:
• Never override or bridge safety devices during operation.
7 .2 A c t i v i t i e s b e f o r e u s e
1 Ensure that all covers are installed on the machine.
2 Ensure the firm fit of all plug connections.
3 Make sure none of the emergency stop switches have been pressed.
4 Make sure all doors on the safety fence are closed.
5 Check ambient temperature.
HINT:
The individual materials have different coefficients of expansion. At an
ambient temperature of 20–25 °C, it is ensured that no significant influences
occur during processing. Therefore, it is recommended to maintain an
ambient temperature of 20–25 °C when operating the machine.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
➢ Ensure that all covers, and safety devices are installed and
functioning properly.
➢ Ensure that there are no people in the danger zone.
Operating instructions
T-Rex Servo-Series
Page 63
23.09.2020