Hazards From Chemical Substances - CNC-Step T-Rex Servo Series Operating Instructions Manual

2 .2 .6 H a z a r d s f ro m c h e mi c a l s u b s t a n c e s
Cooling Emulsion
WARNING:
Risk of damage to health due to contaminated cooling emulsion!
Contaminated cooling emulsion can lead to inflammation when in contact
with the skin.
• Check cooling emulsion at regular intervals.
• When handling contaminated cooling emulsion, wear protective
• Avoid direct skin contact. Remove skin impurities immediately,
• Eat and drink exclusively in the designated break room.
CAUTION:
Risk of damage to health due to contact with cooling emulsion!
Contact with cooling emulsion can lead to damage to health.
• Avoid skin contact.
• Remove cooling emulsion from the skin immediately.
• Do not inhale vapors.
Oil and fat
CAUTION:
Risk of damage to health due to contact with oil and grease!
Contact with oil and fat can lead to damage to health.
• Avoid skin contact.
• Remove oil and fat from the skin immediately.
• Do not inhale vapors.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
clothing and chemical-resistant protective gloves.
especially before breaks and after the end of work.
Operating instructions
T-Rex Servo-Series
Page 15
23.09.2020