Measures After Maintenance - CNC-Step T-Rex Servo Series Operating Instructions Manual

8 .5 M e a s u r e s a f t e r m a i n t e n a n c e
After completion of the maintenance work and before switching on the machine, perform
the following steps:
1 Check all previously loosened bolted connections for a firm fit.
2 Verify that all previously removed guards and covers are properly reinstalled.
3 Ensure that all tools, materials, and other equipment used have been removed from
the workspace.
4 Clean the working area and remove any leaked substances such as for example
liquids, processing material or the like.
5 Ensure that all safety devices of the machine work properly.
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Operating instructions
T-Rex Servo-Series
Page 76
23.09.2020