Wiring Loom Earset Replacement - Minelab MF5 Service Manual

MF5 Service Manual
_________________________________________________________________________________________________________________
e. To replace the Speaker assembly.
•
Check Speaker assembly is in good working order and the speaker cable is correctly sealed
into the Enclosure Speaker and the Circlip External is installed.
•
Check the O-ring Speaker BS034 is clean, lightly greased and correctly positioned in its
channel in the detector chassis.
•
Position the Speaker assembly and insert the four (4) Screws.
f. Assemble the detector as described in Section

3.9.3 Wiring Loom Earset Replacement

a. The Wiring Loom Earset kit is available as a spare part, 3004-0297 Wiring Loom Earset Kit
MF5 includes all parts shown in the following table.
Item Part Number
1 3004-0297
2 9511-0263
3 4309-0069
4 4002-0053
Figure 94: Replace Speaker Assembly
Figure 95: Wiring Loom Earset kit
Description
Wiring Loom Earset Kit MF5
Wiring Loom Earset
Dust Cap Earset Connector
Nut Earset Connector
Table 14: Wiring Loom Earset
75
Closing the Detector Body.
Qty
1
1
1
1