Minelab MF5 Service Manual page 91

MF5 Service Manual
_________________________________________________________________________________________________________________
Figure 113: Screen shot, MUU, Minelab Update Utility software
•
Turn on the MF5
•
The MUU will communicate with a connected detector and determine its software version.
If there is a valid update available, the MUU will display "Updates are available for your
detector" and the MUU will provide the operator with the following options: Install or Quit
•
Click install to begin the upgrade.
•
If the metal detector is up to date the MUU will display "Your detector is up to date" and
prompt the operator to quit the MUU.
•
The MUU will take approximately one minute to complete the update, there will be a
screen showing progress.
•
When the upgrade is complete the MF5 will turn off and back on. The MUU will prompt
the operator to disconnect the detector and quit the application.
d. Minelab will provide detailed instruction when a software update is made available,
including details of the changes in software.
Figure 114: Screen shot, MUU, Detector is up to date.
91