Minelab MF5 Service Manual page 24

MF5 Service Manual
________________________________________________________________________________________________________________
•
Starting with the two (2) long (M4x35mm) screws fit the four (4) remaining screws into the
right side of the detector.
•
Tighten all eight (8) screws.
•
Identify the four (4) Torx (star) screws and check they all have O-rings fitted. Insert the
four (4) Torx screws into the right side of the detector. The Torx screw positions have a
Torx symbol next to their screw holes. Insert the three long screws first.
•
Check the detector assembly and test all moving parts.
Figure 22: Insert four screws
Figure 23: Insert four (4) Torx screws in location with star
Torx (Star) Screw with O ring
24