Minelab MF5 Service Manual page 29

MF5 Service Manual
_________________________________________________________________________________________________________________
•
Disconnect the battery connector from the Main PCB.
•
Unplug the Wiring Loom Handle from the Main PCB.
•
Unplug the Vibration Motor from the Main PCB.
•
Unplug the Coil Connector Loom from the main PCB.
Wiring
Loom
Handle
Coil Connector Loom
Figure 31: Unplug Vibration motor, Wiring Loom Handle and Connector Coil Loom
Battery Connector
Figure 30: Unplug Battery Connector
29
Vibration Motor
Connector to
Vibration Motor