Wiring Loom Earset Replacement - Minelab F3Ci Service Manual

_______________________________________________________________________________________________________________________
Check speaker assembly is in good working order and the speaker cable is correctly
•
sealed into the speaker assembly and the E-Clip is fitted.
Check the speaker O-ring is clean, lightly greased and correctly positioned in its
•
channel in the detector body.
Position the speaker assembly and fit the four screws (12mm).
•
Assemble the detector as described in Section
c.
3.9.3 Wirin Loom Earset Replacement
a. The wiring loom earset is a line replaceable unit and is available as a service kit, 3004-
0058 Wiring Loom Earset Kit which includes associated parts. Figure 94 illustrates the major
parts of the wiring loom earset.
9511-0158 Wiring Loom
1 3004-0058
2 9511-0158
3 4309-0069
4 4002-0053
b. Open the detector body and remove the main PCB as described in Section
the Detector Body and
Figure 93: Replacing Speaker Assembly
Figure 94: Wiring Loom Earset Kit
Wirin Loom Earset Kit, includes all items in this
table
Wiring Loom Earset
Dust Cap Earset Connector
Nut Earset Connector
Table 9: Wiring Loom Earset
3.3.1 - Removing the Main
3.2 - Closing the Detector
PCB. Once completed:
56
F3Ci Service Manual
Body.
4309-0069
4002-0053
3.1 - Opening