Table of Contents
Advertisement
MF5 Service Manual
_________________________________________________________________________________________________________________
The User Interface keypad on the side of the detector is attached to the Chassis with an
adhesive backing, the flexible cable from the user interface passes through an entry hole in
the chassis of the detector which is then sealed with a flowable Silicon Rubber.
Minelab recommend that customer wishing to replace the User Interface (keypad) should
purchase the complete User Interface Chassis as this is assembled sealed and tested.
3.9.8 Detector Chassis Parts
a.
The parts of the detector inside the chassis are show in the following figures.
Item
Part Number
1
0703-0437
2
31-24035-980
3
31-24045-980
4
30-39300-017
5
30-39301-020
6
30-9501-0064
Figure 106: Cover, Cable
Description
Cover, Cable MF5
Screw M4x35 Skt Cap
Screw M4x45 Skt Cap
Tape, Double Sided, 25,40mm
Tape, Foam LD PVC 25x16mm x 15m
Braid, Monel Shield
Table 19: Cover Cable.
82
Qty
1
2
2
1
1
1
Advertisement
Table of Contents
