Replacing A Camlock - Minelab MF5 Service Manual

MF5 Service Manual
_________________________________________________________________________________________________________________

3.5.1 Replacing a Camlock

3004-0047 Camlock kit is available as a spare part and includes the following items.
Item
1
2
3
4
a. Required Tools:
•
Pin Punch 3mm or Hex key driver (allen key) 3mm
b. Camlock replacement can be completed as follows:
•
Fully open the Camlock Lever then using a pin punch and hammer drive the Pin Camlock
Lever out.
Figure 69: Camlock Kit
MRN Description
3004-0047 Camlock Kit
4308-0014 Pin Camlock Lever
8008-0062 Pressure Block Camlock
8008-0061 Camlock Lever
Table 6: Camlock Kit.
Figure 70: Remove Pin Camlock Lever
54
Qty
2
1
1
1