Minelab MF5 Service Manual page 31

_________________________________________________________________________________________________________________
Cable to Sensitivity
Switch
Figure 33: Unplug Switch Sensitivity and User Interface Secondary (keypad)
•
Remove the screw from the Coil Transmitter Connector. Unplug the Coil Transmitter
connector by lifting it off the Main PCB. The Coil Transmitter Connector is part of the Coil
Connector Loom (3004-0300)
•
Remove the screw from the Coil Receiver Connector. Unplug the Coil Receiver connector
from by lifting it off the Main PCB. The Coil Receiver Connector is part of the Coil Connector
Loom (3004-0300).
Cable to Keypad
31
MF5 Service Manual
Locked
Locking bail Open
Unplugged