Battery Status; Earset Socket - Minelab F3 compact Operation Manual

Hide thumbs Also See for F3 compact:

Table of Contents

The LED display will always be off when the detector is first switched

Battery Status

3.1.7

Battery status can be checked at any time by pressing and

holding down the LED On/Off button and then pressing and

immediately releasing the Noise Cancel button.

Once completed the LED display will indicate the battery status

for a period of three seconds, then revert to normal operation.

3.1.8

The F3 COMPACT has an internal speaker located inside the

Main Body, however, it can also be fitted with an Earset via the

Earset Socket. The procedure for connecting the Earset is

described in section 2.3.g.

A standard humanitarian demining Earset (Earset Speaker On)

permits the F3 COMPACT's internal speaker to continue to

function even when the Earset is connected.

For tactical applications, an Earset that mutes the F3 COMPACT's

internal speaker when the Earset is connected is available (Earset

Speaker Off). The Earset Speaker Off is identified by a short length

of green tubing located at the rear of the Earset plug.

Minelab strongly recommends that an operator always wears an

* WARNING *

Earset when using the F3 COMPACT detector.

F3 COMPACT Version 2 Operations Manual

NOTE

on.

Table of Contents