Section 8: Packing For Shipment; General Instructions; Repacking In Original Carton; Repacking In A Different Carton - Mallinckrodt NELLCOR NPB-4000 Service Manual

SECTION 8: PACKING FOR SHIPMENT

8. PACKING FOR SHIPMENT

8.1 GENERAL INSTRUCTIONS

8.2 REPACKING IN ORIGINAL CARTON

8.3 REPACKING IN A DIFFERENT CARTON

8.1 General Instructions
8.2 Repackaging in Original Carton
8.3 Repackaging in a Different Carton
To ship the monitor for any reason, follow the instructions in this section.
Pack the monitor carefully. Failure to follow the instructions in this section may
result in loss or damage not covered by the Mallinckrodt warranty. If the
original shipping carton is not available, use another suitable carton; North
American customers may call Mallinckrodt Technical Services to obtain a
shipping carton.
Prior to shipping the monitor, contact your supplier or the local Mallinckrodt
office (Technical Services Department) for a returned goods authorization
(RGA) number. Mark the shipping carton and any shipping documents with the
returned goods authorization number.
If available, use the original carton and packing materials. Pack the monitor as
follows:
1. Place the monitor and, if necessary, accessory items in original packaging.
2. Place in shipping carton and seal carton with packaging tape.
3. Label carton with shipping address, return address and RGA number, if
applicable.
If the original carton is not available, use the following procedure to pack the
NPB-4000/C:
1. Place the monitor in a plastic bag.
2. Locate a corrugated cardboard shipping carton with at least 200 pounds per
square inch (psi) bursting strength.
3. Fill the bottom of the carton with at least 2 inches of packing material.
4. Place the bagged unit on the layer of packing material and fill the box
completely with packing material.
8-1