Packing For Shipment - Mallinckrodt NELLCOR NPB-4000 Service Manual

16.18.11 SRC-2 Settings
Remote/Local: DC RCAL 63

16.19 PACKING FOR SHIPMENT

16.19.1 General Instructions
16.19.2 Repackaging in Original Carton
Rate: 112
Light: High2
Modulation: HIGH
Figure 16-5: MP-205 with SRC-2 Serial Port TXD Signal, U4 Pin 25
Should you need to ship the oximetry module for any reason, follow the
instructions in this section.
Pack the module carefully. If the original shipping carton is not available, use
another suitable carton or call Mallinckrodt Technical Services Department to
obtain a shipping carton.
Prior to shipping the device, contact your supplier or your local office
Mallinckrodt Technical Services Department for a returned goods authorization
(RGA) number. Mark the shipping carton and any shipping forms with the RGA
number.
If available, use the original carton and packing materials. Pack the module as
follows:
1. Place module in original packaging.
2. Place packaging in shipping carton and seal carton with packaging tape.
3. Label carton with shipping address, return address, and RGA number.
Section 16: MP-205 Service Manual; 044540A-0296
16-13