Connecting The Modem To The Console Port On The Srx110 Services Gateway; Connecting To The Cli At The User End For The Srx110 Services Gateway - Juniper SRX110 Manual

SRX110 Services Gateway Hardware
Related
Documentation

Connecting the Modem to the Console Port on the SRX110 Services Gateway

Related
Documentation

Connecting to the CLI at the User End for the SRX110 Services Gateway

118
Connecting the Modem to the Console Port on the SRX110 Services Gateway on page 118
Connecting to the CLI at the User End for the SRX110 Services Gateway on page 118
SRX110 Services Gateway Software Configuration Overview on page 121
To connect the dial-up modem to the console port on the services gateway:
Turn off power to the services gateway.
1.
Turn off power to the modem.
2.
Plug one end of the Ethernet cable supplied with your services gateway into the
3.
console port on the services gateway.
Plug the other end of the CAT-5e cable (Ethernet cable) into the RJ-45 to DB-9 serial
4.
port adapter supplied with your services gateway.
Connect the serial port adapter to a separately purchased DB-9 female to DB-25
5.
male adapter or other adapter appropriate for your modem.
Plug the modem adapter into the DB-25 connector on the modem.
6.
Connect the modem to your telephone network.
7.
Turn on the power to the modem.
8.
Power on the services gateway by pressing the Power button on the front panel. Verify
9.
that the LED on the front panel turns green.
Power
NOTE: Most modems have an RS-232 DB-25 connector. You must
separately purchase an adapter to connect your modem to the RJ-45 to
DB-9 adapter and the Ethernet cable supplied with the services gateway.
Connecting the Modem at the SRX110 Services Gateway End on page 117
Connecting to the CLI at the User End for the SRX110 Services Gateway on page 118
SRX110 Services Gateway Software Configuration Overview on page 121
To remotely connect to the CLI through a dial-up modem connected to the console port
on the services gateway:
Connect a modem at your remote location to a management device such as a PC or
1.
laptop computer.
Start your asynchronous terminal emulation application (such as Microsoft Windows
2.
HyperTerminal) on the PC or laptop computer.
Copyright © 2012, Juniper Networks, Inc.