Installation Overview; Installation Overview For The Srx110 Services Gateway; Table 29: Installation Procedure For The Srx110 Services Gateway - Juniper SRX110 Manual

CHAPTER 10

Installation Overview

Installation Overview for the SRX110 Services Gateway

Copyright © 2012, Juniper Networks, Inc.
Installation Overview for the SRX110 Services Gateway on page 77
Required Tools and Parts for Installing and Maintaining the SRX110 Services
Gateway on page 78
After you prepare your installation site, you are ready to unpack and install the services
gateway. It is important to perform the installation procedure as indicated in
on page 77.

Table 29: Installation Procedure for the SRX110 Services Gateway

Step Task
1 Review the safety guidelines.
2 Verify that you have prepared your
site for the installation of the
services gateway in accordance
with the checklist.
3 Unpack the services gateway and
verify that all parts are received.
4 Prepare the services gateway for
installation.
5 Install the services gateway.
6 Connect cables to external devices.
Additional Information
"SRX110 Services Gateway General Safety
Guidelines and Warnings" on page 45
"Site Preparation Checklist for the SRX110 Services
Gateway" on page 35
"Unpacking the SRX110 Services Gateway" on
page 81
Preparing the SRX110 Services Gateway for
Rack-Mount, Desk-Mount, and Wall-Mount
Installation
"Installing the SRX110 Services Gateway in a Rack"
on page 89
"Installing the SRX110 Services Gateway on a Desk"
on page 93
"Installing the SRX110 Services Gateway on a Wall"
on page 95
"Connecting and Organizing the SRX110 Services
Gateway Interface Cables" on page 102
Table 29
77