Resetting The Srx110 Services Gateway - Juniper SRX110 Manual

Resetting the SRX110 Services Gateway

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Chapter 14: Connecting, Grounding, and Powering On the SRX110 Services Gateway
SRX110 Services Gateway Front Panel and Back Panel Views with 3G and Integrated
VDSL2 on page 9
SRX110 Services Gateway LEDs on page 13
The Reset Config button on the front panel of the services gateway can be used to remove
the current configuration and reset the device to the default (factory) configuration. The
button is recessed in the front panel to prevent it from being pressed accidentally.
NOTE: Pressing and holding the Reset Config button for 15 seconds or more
deletes all configurations on the device and loads and commits the default
(factory) configuration.
Powering On the SRX110 Services Gateway on page 105
Powering Off the SRX110 Services Gateway on page 105
Connecting the SRX110 Services Gateway to the Power Supply on page 101
Grounding the SRX110 Services Gateway on page 103
Using the Reset Config Button on the SRX110 Services Gateway on page 145
SRX110 Services Gateway Front Panel and Back Panel Views with 3G and Integrated
VDSL2 on page 9
SRX110 Services Gateway LEDs on page 13
107