Srx110 Services Gateway Agency Approvals - Juniper SRX110 Manual

Related
Documentation

SRX110 Services Gateway Agency Approvals

Copyright © 2012, Juniper Networks, Inc.
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7
Evaluated to the TN power system
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
Operate the services gateway within marked electrical ratings and product usage
instructions.
For the services gateway and peripheral equipment to function safely and correctly,
use the cables and connectors specified for the attached peripheral equipment, and
make certain they are in good condition.
SRX110 Services Gateway Power Specifications and Requirements on page 68
SRX110 Services Gateway Maintenance and Operational Safety Guidelines and Warnings
on page 57
Grounding the SRX110 Services Gateway on page 103
SRX110 Services Gateway Agency Approvals on page 63
The services gateway complies with the following standards:
Safety
CSA 60950-1 (2003) Safety of Information Technology Equipment
UL 60950-1 (2003) Safety of Information Technology Equipment
EN 60950-1 (2001) Safety of Information Technology Equipment
IEC 60950-1 (2001) Safety of Information Technology Equipment (with country
deviations)
EN 60825-1 +A1+A2 (1994) Safety of Laser Products - Part 1: Equipment Classification
EN 60825-2 (2000) Safety of Laser Products - Part 2: Safety of Optical Fiber Comm.
Systems
EMC
Chapter 7: Safety and Regulatory Compliance Information
63