Srx110 Services Gateway Integrated Vdsl2 Interface Leds; Table 16: Integrated Vdsl2 Leds - Juniper SRX110 Manual

Related
Documentation

SRX110 Services Gateway Integrated VDSL2 Interface LEDs

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Table 15: Profiles Supported on the Integrated VDSL2
Interface (continued)
Profile
17a
Auto
SRX110 Services Gateway Integrated VDSL2 Interface Overview on page 25
SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 27
Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 28
The integrated VDSL2 interface has two LEDs.
states.

Table 16: Integrated VDSL2 LEDs

LED Color
SYNC Green
TX/RX Green
SRX110 Services Gateway Integrated VDSL2 Interface Overview on page 25
SRX110 Services Gateway LEDs on page 13
Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 28
Chapter 4: SRX110 Services Gateway Integrated VDSL2 Interface
Data Rate (Mbps)
100
Auto-negotiated (based on profile)
Table 16 on page 27
State Description
On Indicates that the VDSL2 interface link is up.
Blinking Indicates training is in progress and there is
no connection to CO.
NOTE: Training refers to the negotiation of
the best mode for a DSL connection.
Off Indicates that interface has not yet booted
up.
Blinking Indicates that traffic is passing through.
On Indicates that it is an invalid state.
Off Indicates that no traffic is passing through.
describes the LED
27