Juniper SRX110 Manual page 159

Copyright © 2012, Juniper Networks, Inc.
Table 47: Component LEDs on the Services Gateway (continued)
LED State
Green
Alarm LED
Red
Amber
Off
Chapter 20: Monitoring Hardware Components
Meaning
Indicates that the device is
functioning normally.
The device indicates a critical
alarm.
The device indicates a major
alarm.
The device is starting up.
NOTE: When the system is
up and running, if the Alarm
LED is off, it indicates that no
alarms are present on the
device.
Possible Causes and
Corrective Actions
Normal condition. No action
is required.
A critical alarm indicates a
critical situation on the
gateway that requires
immediate action.
See "Monitoring the SRX110
Services Gateway Using
Chassis Alarm Conditions"
on page 142.
A major alarm requires
monitoring or maintenance.
If left unchecked, it might
cause an interruption in
service or degradation in
performance.
See "Monitoring the SRX110
Services Gateway Using
Chassis Alarm Conditions"
on page 142.
Normal condition. No action
is required.
141