Configuring Basic Settings; Srx110 Services Gateway Software Configuration Overview; Preparing The Srx110 Services Gateway For Configuration; Table 43: Storage Media On The Services Gateway - Juniper SRX110 Manual

CHAPTER 17

Configuring Basic Settings

SRX110 Services Gateway Software Configuration Overview

Preparing the SRX110 Services Gateway for Configuration

Copyright © 2012, Juniper Networks, Inc.
SRX110 Services Gateway Software Configuration Overview on page 121
Performing Initial Software Configuration on the SRX110 Services Gateway Using the
CLI on page 123
Performing Initial Software Configuration on the SRX110 Services Gateway Using the
J-Web Interface on page 126
This topic includes the following sections:
Preparing the SRX110 Services Gateway for Configuration on page 121
Understanding Built-In Ethernet Ports on page 122
Understanding Management Access on page 122
When the device powers on, it tries to boot Junos OS from the default storage medium.
If the device fails to boot from the default storage medium, it tries to boot from the
alternate storage medium.
Table 43 on page 121 provides information on the storage media available on the services
gateway.

Table 43: Storage Media on the Services Gateway

Storage Media
CompactFlash
USB storage device
NOTE: The SRX Series devices that ship with Junos OS Release 10.0 or later
are formatted with dual-root partitions from the factory. SRX Series devices
that are running Junos OS Release 9.6 or earlier can be formatted with
dual-root partitions when they are upgraded to Junos OS Release 10.0 or
later.
Type
Default; always present
Alternate
121