CHAPTER 13
Installing the Services Gateway
SRX110 Services Gateway Safety Requirements, Warnings, and Guidelines
Related
Documentation
Installing the SRX110 Services Gateway in a Rack
Copyright © 2012, Juniper Networks, Inc.
SRX110 Services Gateway Safety Requirements, Warnings, and Guidelines on page 89
Installing the SRX110 Services Gateway in a Rack on page 89
Adjusting the Power Supply Adapter Tray for the SRX110 Services Gateway for
Rack-Mount Installation on page 92
Installing the SRX110 Services Gateway on a Desk on page 93
Installing the SRX110 Services Gateway on a Wall on page 95
Installing a 3G USB Modem in the SRX110 Services Gateway USB Port on page 97
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment and a list of safety warnings, see
Safety Warning Levels" on page
NOTE:
Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
General Site Guidelines for Installing the SRX110 Services Gateway on page 38
Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 78
Preparing the SRX110 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
You can front-mount the SRX110 Services Gateway in a rack. Many types of racks are
acceptable, including 4-post (telco) racks, enclosed cabinets, and open-frame racks.
For more information about the type of rack or cabinet that the SRX110 Services Gateway
can be installed into, see
"SRX110 Services Gateway Rack Requirements" on page
"SRX110 Services Gateway Definition of
43.
39.
89