Interface Cable Specifications And Connector Pinouts; Interface Cable And Wire Specifications For The Srx110 Services Gateway; Table 24: Cable And Wire Specifications For Ports - Juniper SRX110 Manual

CHAPTER 9
Interface Cable Specifications and
Connector Pinouts

Interface Cable and Wire Specifications for the SRX110 Services Gateway

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Interface Cable and Wire Specifications for the SRX110 Services Gateway on page 71
RJ-45 Connector Pinouts for the SRX110 Services Gateway Ethernet Port on page 72
RJ-45 Connector Pinouts for the SRX110 Services Gateway Console Port on page 73
RJ-11 Connector Pinouts for the SRX110 Services Gateway on page 74
Table 24 on page 71 lists the specifications for the cables that connect to ports.

Table 24: Cable and Wire Specifications for Ports

Port Cable Specification
Console RS-232 (EIA-232)
port serial cable
Ethernet CAT-5e (Category 5)
port cable or equivalent
suitable for
100BASE-T
operation
VDSL2 For
port VDSL/ADSL-POTS:
RJ-11 cable
For
VDSL/ADSL-ISDN:
RJ-11/RJ-45 cable
RJ-45 Connector Pinouts for the SRX110 Services Gateway Ethernet Port on page 72
RJ-45 Connector Pinouts for the SRX110 Services Gateway Console Port on page 73
RJ-11 Connector Pinouts for the SRX110 Services Gateway on page 74
Maximum
Cable/Wire Required Length
One 6 ft (1.83 m) length 6 ft
with DB-9/RJ-45 (1.83 m)
connectors
One 15 ft (4.57 m) 328 ft
length with RJ-45/RJ-45 (100 m)
connectors
For 18K ft
VDSL/ADSL-POTS: (5.486K
One 10 ft (3.048 m) m)
with RJ-11 connector
For
VDSL/ADSL-ISDN:
One 10 ft (3.048 m)
with RJ-45 connector
Device Receptacle
RJ-45
RJ-45
For
VDSL/ADSL-POTS:
RJ-11
For
VDSL/ADSL-ISDN:
RJ-45
71