Table 31: Parts List For A Fully Configured Srx110 Services Gateway; Table 32: Accessory Parts List For The Srx110 Services Gateway - Juniper SRX110 Manual

SRX110 Services Gateway Hardware
Related
Documentation
82
If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX110 Services Gateway contains the chassis with installed
components, listed in Table 31 on page
parts listed in Table 32 on page
NOTE: The parts shipped with your device can vary depending on the
configuration you ordered.

Table 31: Parts List for a Fully Configured SRX110 Services Gateway

Part
SRX110 Services Gateway with 8xFE ports, 1xUSB port, 1x3G-WAN USB port,
and base memory (1 GB RAM, 1 GB Flash)
Power supply adapter of 60 watts
3-Prong Power Cord
DB-9 to RJ-45 Adapter, Straight Through, 7 feet
Extension cable for 3G USB modem

Table 32: Accessory Parts List for the SRX110 Services Gateway

Part
Juniper Networks Product Warranty
End User License Agreement
Quick Start Guide
Security Products Safety Guide
Juniper Compliance Form Letter
Product Registration
NOTE: The mounting kits available for rack, wall, and desk installation of the
SRX110 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 78
Unpacking the SRX110 Services Gateway on page 81
82, and an accessory box, which contains the
82.
Copyright © 2012, Juniper Networks, Inc.
Quantity
1
1
1
1
1
Quantity
1
1
1
1
1
1