Srx110 Services Gateway Integrated Vdsl2 Interface Key Features; Srx110 Services Gateway Integrated Vdsl2 Interface Supported Profiles; Table 15: Profiles Supported On The Integrated Vdsl2 Interface - Juniper SRX110 Manual

SRX110 Services Gateway Hardware

SRX110 Services Gateway Integrated VDSL2 Interface Key Features

Related
Documentation

SRX110 Services Gateway Integrated VDSL2 Interface Supported Profiles

26
Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 28
The following features are supported on integrated VDSL2:
ADSL/ADSL2/ADSL2+ backward compatibility with POTS supporting Annex-A
(Annex-M) and ISDN supporting Annex-B
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah)
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+
mode
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when
the VDSL2 interface is operating in ADSL2 mode)
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 interface
is operating in ADSL2 mode)
Support for a maximum of 10 permanent virtual connections (PVCs) (only in
ADSL/ADSL2/ADSL2+ mode)
Dying Gasp support (ADSL/ADSL2/ADSL2+ and VDSL2 modes)
SRX110 Services Gateway Integrated VDSL2 Interface Overview on page 25
SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 27
Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 28
A profile is a table that contains a list of preconfigured VDSL2 settings.
lists the different profiles supported on integrated VDSL2, along with their data rates.

Table 15: Profiles Supported on the Integrated VDSL2 Interface

Profile
8a
8b
8c
8d
12a
12b
Data Rate (Mbps)
50
50
50
50
68
68
Copyright © 2012, Juniper Networks, Inc.
Table 15 on page 26