Installing The Srx300 Services Gateway On A Desk; Table 15: Parts List For A Fully Configured Srx300 Services Gateway; Table 16: Accessory/Upgrade Parts List For The Srx300 Services Gateway - Juniper SRX300 Hardware Manual

SRX300 Services Gateway Hardware Guide

Installing the SRX300 Services Gateway on a Desk

36
NOTE: The parts shipped with your services gateway can vary depending on
the configuration you ordered.

Table 15: Parts List for a Fully Configured SRX300 Services Gateway

Component
SRX300 services gateway
CAT5E cable
DB9-to-RJ45 adapter
USB console cable with Type-A and Mini-B USB plugs
Documentation Roadmap and Product Warranty
Power supply adapter and power cord

Table 16: Accessory/Upgrade Parts List for the SRX300 Services Gateway

Part
RoHS Card
End User License Agreement
You can mount an SRX300 Services Gateway on a desk or any other level surface
horizontally or vertically. The four rubber feet attached to the chassis provide stability.
Before mounting an SRX300 Services Gateway on a desk or level surface:
Follow these guidelines when installing the SRX300 Services Gateway on a desk:
Verify that the installation site meets the requirements described in
Checklist for the SRX300 Services Gateway" on page
Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
The horizontal position is the standard installation position. To install the device in a
horizontal position:
Make sure that the rubber feet are attached to the chassis.
1.
Place the device on a desk with the Juniper Networks logo, which is embossed on the
2.
top cover, facing up.
Quantity
1
1
1
1
1
1
Quantity
1
1
"Site Preparation
23.
Copyright © 2019, Juniper Networks, Inc.