Connecting Cable Between Receiver Unit And Control Unit - Fuji Electric FE ZSS Instruction Manual

4.10.2 Connecting cable between receiver unit and control unit

The receiver unit and the control unit are connected with the "Cable between control unit and receiver unit".
Both ends of it are fitted with a female 10-pin connector (waterproof type). The connector has no polarity.
Perform wiring in the way that the cable between receiver unit and control unit is not pulled.
able between control unit
and receiver unit
able connector between control unit
and receiver unit
Fig. 4－14
- 20 -
INZ-TN1ZSS-E