Fuji Electric FE ZSS Instruction Manual page 45

Receiver box
(3) Mount the removed receiver box and transmitter box using the hexagonal bolt.
(4) Provide the receiver/transmitter cable (for calibration) or the cable between control unit and receiver
unit (for calibration).
(5) Wiring should be performed as following figure.
INZ-TN1ZSS-E
exagonal bolt
Calibration gas cell
Cable between control unit and
receiver unit (for calibration)
tack
exagonal bolt
Receiver/Transmitter cable
(for calibration)
- 35 -
Transmitter box